_
Motorcraft® Cetane Booster and Performance Improver
 
  • Helps improve Ford diesel engine performance Note: This ultra-low sulfur formulation can be used in engines required to meet 2007 emissions requirements (e.g., Ford’s 6.4L diesel engine) and is backward compatible as well (i.e., can be used in Ford’s 6.9L, 7.3L and 6.0L diesel engines)
  • Ultra Low Sulfur Diesel (ULSD) compliant
  • Combats the effects of poor-quality diesel fuel
  • Boosts the cetane rating (fuel ignitability) of diesel fuel for mproved starting performance
  • Increases power
  • Helps smooth engine operation
  • Improves fuel economy
  • Adds lubricity to fuel to reduce engine wear
  • Recommended by Ford Motor Company
  • Available in four (4), six (6) or twelve (12) 20-fluid-oz. bottles

 

_
Motorcraft® Choke and Linkage Cleaner
 
  • Sprays away grease, sludge, gum and varnish from the throttle plates, throttle bodies and other induction system components
  • Helps clean oil and dirt from choke, carburetor linkage and manifold heat controls
  • Not for use in diesel engines
  • Recommended by Ford Motor Company
  • Available in 11-oz. aerosol spray cans
_
Motorcraft® High Performance DOT 3 Brake Fluid
 
  • The right fluid for Ford, Lincoln and Mercury braking systems
  • For vehicles with disc, drum or ABS brakes
  • Minimum dry boiling point of 500°F (260°C)
  • Recommended by Ford Motor Company
  • Available in 12-fluid-oz. bottles
_
  • The right cleaner for Ford, Lincoln and Mercury braking systems
  • Spray away grease and oil from metal brake parts
  • Fast cleaning and fast drying
  • Contains no chlorinated solvents or chlorofluorocarbon (CFC) propellants
  • Recommended by Ford Motor Company
  • Special low volatile organic compound formula also available
  • Available in 13-oz. aerosol cans or 13-oz. aerosol cans (low volatile organic compound)

(Material) Safety Data Sheets (SDS) for Motorcraft Service Chemicals and Lubricants are available at www.fordsds.com